Injectafix Pro 300ml - Bonding Adhesive For Loose Tiles & Hollow Floors

Rebond suitable loose tiles without removing them

Injectafix Pro 300ml by Floor-Fix Pro is the Precision cartridge format of our bonding adhesive for suitable loose tiles and accessible voids beneath floors. Its flexible, self-levelling co-polymer formula flows into the void to help restore the bond without lifting the existing surface.

300ml cartridge — use with a caulking gun

This format requires a caulking gun. The precision injection tip directs adhesive through a small access hole in the grout line. Follow the supplied instructions for preparing the hole, trimming the tip and applying the adhesive.

Prefer a no-gun option? Injectafix Easy Squeeze 300ml contains the same adhesive formula in a squeezable tube.

Is Injectafix right for the repair?

Injection repair is suited to intact loose tiles over a sound substrate where the adhesive can reach the void. A hollow or drummy sound can indicate a void, but sound alone does not establish the cause or confirm that a repair is needed. Check tile movement and the condition of the floor before choosing a treatment.

Injectafix is not a repair for rot, structural failure or cracked-through tiles. For other floor constructions, check compatibility and the flooring manufacturer’s instructions before use.

Choose the pack quantity

Each cartridge contains 300ml. Select 1, 3, 4, 6 or 12 cartridges above. The quantity selector describes the number of cartridges, not the area covered; the amount needed depends on the size and depth of the accessible void.

Finish the tile repair in the right order

Follow the pack instructions, clean excess adhesive immediately and weight the tile as directed. Leave the repair undisturbed for at least 24 hours as instructed, and confirm the tile is secure before restoring the grout with Twist & Grout.

Use our floor repair guide to choose the right treatment.