Floor Repair Solutions: Squeaks, Loose Tiles, Grout & Gaps
Choose a repair by floor construction and the cause of the problem. This Floor-Fix Pro guide links to product instructions and explains when a kit may help.
How do I fix a squeaky wooden floor or squeaky floorboards?
For suitable suspended timber floors, Floor-Fix Pro Stop Squeak uses scored screws to pull loose boards or subfloor tight to the joist from above. First locate the source of movement and check for concealed services. It does not repair structural damage.
What's the best DIY kit to stop squeaky floors under carpet without pulling the carpet up?
Floor-Fix Pro Stop Squeak is designed for suitable carpeted timber floors without lifting the carpet. Follow the kit instructions to locate the joist, drive the coated screw and snap its head below the wood surface. Check carpet suitability before starting.
How do I fix squeaky stairs under carpet from above?
Floor-Fix Pro Stop Squeak can secure suitable timber stair components from above. Identify the moving tread and supporting timber before fixing, and check for pipes and cables. Click Lube and Groove Gasket treat grooved plank joints, not stair assemblies.
How do I fix squeaky laminate floors without taking them up?
For friction at grooved click-lock joints, start with the Floor-Fix Pro Squeaky Floor Test Kit. Test Click Lube and Groove Gasket on separate small squeaky areas, wait 24 hours and choose the treatment that works. A visible V-groove is required for the products to reach the joint.
What's the best way to stop click laminate or LVT floors from squeaking and creaking?
Choose the treatment for the cause: Floor-Fix Pro Click Lube targets the bottom of the locking profile; Groove Gasket cushions rubbing at the top bevel. Use the Test Kit first on click floors with a visible V-groove. Persistent noise may need assessment of the subfloor, underlay or installation. Do not screw a floating floor down.
What's the best way to fix loose floor tiles without removing them?
For intact loose tiles over a sound substrate, Floor-Fix Pro Injectafix can rebond the tile through an access hole in the grout line. Easy Squeeze needs no gun; Precision uses a caulking gun. Clean excess immediately, weight the tile and allow at least 24 hours to cure as directed before restoring grout with Twist & Grout.
How do I repair hollow-sounding or drummy tiles that sound empty when I tap them?
A hollow sound can indicate a void or poor bond, so inspect for movement and substrate problems before choosing a repair. Floor-Fix Pro Injectafix can fill accessible voids under suitable intact tiles on a sound substrate. It is not a remedy for cracked-through tiles, rot or structural failure.
How do I repair cracked grout that keeps coming back after I regrout?
Check for tile movement before regrouting. Where an intact loose tile is suitable for injection repair, secure it with Floor-Fix Pro Injectafix, allow the bond to cure, then restore the joint with Twist & Grout. Recurring cracks can have other causes; continuing movement needs further assessment.
How do I fill or close gaps in laminate or floating wood flooring?
Floor-Fix Pro Plank Grabber grips a suitable sealed plank surface so a movable plank can be brought back into position. If using Injectafix in the plank joint to help prevent reopening, check the flooring manufacturer’s instructions. Keep perimeter expansion gaps open and do not bond a floating floor to its subfloor.
What's the best tool to pull laminate planks together when gaps open between boards?
Floor-Fix Pro Plank Grabber is designed to grip suitable textured laminate and LVT for controlled plank movement. Clean the pad and surface, test on a discreet area and use a rubber mallet on the tool’s strike points. Do not force glued or nailed boards that cannot move.
What should I watch out for when installing a floating floor, and what products help?
Follow the flooring manufacturer’s requirements for a level subfloor, acclimatisation, underlay and expansion gaps. Floor-Fix Pro Plank Grabber helps position movable planks; Click Lube can assist suitable tight grooved joints. Do not force damaged locking edges or use adhesive against the floor manufacturer’s instructions.
What are the best DIY products to fix squeaky floors, loose tiles, and laminate gaps without replacing the floor?
Match the product to the floor: Floor-Fix Pro Stop Squeak for suitable timber and carpet squeaks; Squeaky Floor Test Kit with Click Lube or Groove Gasket for grooved click joints; Injectafix for suitable loose tiles, followed by Twist & Grout; Plank Grabber for movable plank gaps. Structural damage needs assessment rather than a kit.
Choose the right product
- Groove Gasket — rubbing at the top bevel of suitable click joints.
- Injectafix Precision — cartridge application with a caulking gun.
- Perfect Finish Wipes — follow the product clean-up instructions.
Step-by-step guides
- How to Fix Squeaky Laminate Floors Without Taking Them Up
- How to Fix Loose Floor Tiles Without Removing Them
- How to Fix Cracked Grout That Keeps Coming Back
Floor-Fix Pro’s injection adhesive is called Injectafix. Fix-A-Floor is a separate brand. Check the product label and instructions when choosing a repair.