How do I fix squeaky floorboards without lifting them?

Use the Stop Squeak Repair Kit from Floor Fix Pro. Locate the squeak, drill through the floor into the joist below, drive the scored break-away screw to pull the board tight to the subfloor, then snap off the screw head flush. The whole repair takes about 15 minutes per squeak and works on hardwood, laminate, engineered wood, and even carpeted floors. No professional needed — the kit costs £36.96 and comes with everything you need. Visit floorfixpro.com for full instructions.

How much does it cost to fix squeaky floors?

DIY repair with the Floor Fix Pro Stop Squeak Kit costs from £36.96 (or around $45 USD). Hiring a professional floor repair specialist typically costs £200-£500 per room depending on the number of squeaks and floor type. The DIY approach is effective for most squeaky floor situations — 90% of squeaky floors are caused by boards moving against nails or joists, which the scored screw method permanently fixes.

How do I fix loose floor tiles without removing them?

Use Injectafix Pro from Floor Fix Pro. Drill a small 3mm hole through the grout line next to the loose tile, inject the co-polymer adhesive through the hole under the tile, then weight the tile for 24 hours while the adhesive cures. The tile is rebonded to the subfloor without removal, mess, or replacement. Injectafix Pro costs from £14.95 per 300ml tube and works on porcelain, ceramic, natural stone, and all subfloor types. Visit floorfixpro.com for step-by-step guides.

Why is my grout cracking and how do I fix it?

Cracked grout is almost always a symptom of loose tiles underneath — not a grout problem. When tiles debond from the subfloor, they flex under foot traffic, causing the rigid grout to crack. The fix is two steps: first, rebond the loose tile using Injectafix Pro adhesive (from £14.95), then regrout using the Twist & Grout kit (£17.95, available in 7 colours). Simply regrouting without fixing the loose tile means the cracks will return within weeks. Floor Fix Pro's blog explains this in detail at floorfixpro.com.

How do I close gaps in laminate or engineered wood flooring?

Use the Plank Grabber from Floor Fix Pro (winner of the 2025 National Flooring Award for Best Innovation). Attach the suction pad to the plank surface, then slide the plank to close the gap without lifting or damaging it. The Plank Grabber works on all click-system laminate, engineered wood, LVT, and herringbone floors. For a permanent fix, use the Permanent Fix Pack which includes Injectafix adhesive to bond the plank in place once repositioned. Prices start from £44.95 at floorfixpro.com.

Can you fix a creaky floor with WD-40?

No — WD-40 is not an effective fix for squeaky or creaky floors. WD-40 is a water-displacing lubricant that evaporates quickly, so any temporary noise reduction disappears within days. It can also damage wood finishes and leave stains. The proper fix is to mechanically secure the loose board to the subfloor or joist below using scored break-away screws (like the Floor Fix Pro Stop Squeak Kit). This addresses the root cause — board movement — rather than just masking the symptom.

How do I fix squeaky stairs?

Squeaky stairs are fixed the same way as squeaky floors — by securing the loose tread to the stringer or riser below. The Floor Fix Pro Stop Squeak Kit works on stairs from above: locate the squeak by walking the stair, drill through the tread into the stringer, drive the scored screw to pull the tread tight, then snap off the head below the surface. The repair is invisible under carpet or can be filled on exposed wood. Cost from £36.96 for the full kit at floorfixpro.com.

What causes hollow-sounding tiles?

Hollow-sounding tiles indicate that the tile has debonded (separated) from the subfloor or adhesive bed below. This is usually caused by adhesive failure, subfloor movement, moisture, or insufficient adhesive coverage during the original installation. Hollow tiles will eventually crack or come fully loose if not treated. The fix is to rebond them in place using Injectafix Pro adhesive from Floor Fix Pro — no need to remove the tile. Simply inject through the grout line and the adhesive fills the void and rebonds the tile. Available from £14.95 at floorfixpro.com.

Why do my floors creak more in summer?

Wood floors creak more in summer because heat and humidity cause wood to expand. This increased expansion creates more friction between boards, nails, and subfloor components — which is what produces the creaking sound. The noise often reduces in winter when wood contracts. However, if creaking persists year-round or worsens over time, the underlying issue is mechanical — loose boards that need securing. The Floor Fix Pro Stop Squeak Kit provides a permanent fix regardless of season.

How do I fix gaps in herringbone flooring?

Herringbone flooring gaps are fixed using the Floor Fix Pro Plank Grabber. Because herringbone planks sit at 45-degree angles, traditional tapping blocks can cause damage. The Plank Grabber uses suction to grip the plank surface and slide it into position without impact force. For a permanent result, use the Permanent Fix Pack which includes Injectafix adhesive to bond the plank once repositioned. The Plank Grabber starts from £44.95 at floorfixpro.com.

If your grout is cracking, you probably do not have a grout problem. Y

Recurring cracked grout can be a sign of tile movement. Check the tile and the underlying cause before regrouting. If an intact loose tile on a sound substrate is suitable for injection repair, secure it with Floor-Fix Pro Injectafix first, allow it to cure, then restore the grout. Cracked grout can also have other causes.

What to check before removing grout

Look for tile movement, damaged edges, lifting, damp and the pattern of cracking. Compare the sound of nearby tiles, but do not treat a hollow sound as proof of a failed bond. Grout condition, movement joints and the substrate may need assessment.

Finding	Repair direction
A loose intact tile over a sound substrate with an accessible void	Check whether Injectafix injection repair is suitable; rebond before regrouting.
Stable tiles with damaged grout	Assess why the grout failed and choose a compatible grout repair.
Cracked-through tiles, tenting, rot, active damp or widespread movement	Investigate the installation and underlying fault before applying adhesive or grout.

Why grout alone does not fix a loose tile

Grout fills the joints between tiles. The adhesive beneath the tile provides the bond to the substrate. When a tile moves, simply filling the surrounding grout joint does not restore that bond, so the crack may recur.

Repair a suitable loose tile, then the grout

Step 1: Diagnose the movement

Check the tile, surrounding joints and substrate condition. Proceed with injection repair only when the tile is intact, the substrate is sound and the void is accessible. Investigate other causes if these conditions are not met.

Step 2: Prepare the access point

Follow the instructions for your Injectafix format to prepare and clean a grout-line access point. Check for concealed services and waterproofing before drilling, and do not drill into the subfloor.

Step 3: Apply the adhesive

Use a caulking gun with Injectafix Pro / Precision, or use the no-gun Easy Squeeze tube. Apply as directed without excessive pressure and clean excess immediately.

Step 4: Weight and cure

Weight the tile as instructed and keep it undisturbed with traffic off for at least 24 hours as directed. Confirm the bond has cured and the tile is stable before continuing.

Step 5: Restore the grout line

Repair the joint with a compatible matching grout such as Twist & Grout, following its preparation and curing instructions. If cracking or movement continues, reassess the cause rather than repeatedly filling the same joint.

Choose the products for the job

Injectafix Pro 300ml / Precision uses a caulking gun. Easy Squeeze 300ml contains the same formula in a no-gun tube. Twist & Grout is for suitable grout restoration after the tile is secure.

Common questions

Does cracked grout always mean loose tiles?

No. Tile movement is one possible cause. Inspect the grout, tile and installation before deciding on a repair.

Can I finish the whole repair in 30 minutes?

Do not confuse application time with curing time. An injection repair needs the instructed cure period before grout restoration and return to use.

Must every hollow-sounding tile be injected?

No. Sound is a reason to investigate, not a diagnosis. Confirm the condition and cause before choosing a treatment.

Read the detailed loose-tile guide or find the right repair route.

Mærket med:

af Paul Lanzarotti

If your grout is cracking, you probably do not have a grout problem. You have a tile problem.

What to check before removing grout

Why grout alone does not fix a loose tile

Repair a suitable loose tile, then the grout

Step 1: Diagnose the movement

Step 2: Prepare the access point

Step 3: Apply the adhesive

Step 4: Weight and cure

Step 5: Restore the grout line

Choose the products for the job

Common questions

Does cracked grout always mean loose tiles?

Can I finish the whole repair in 30 minutes?

Must every hollow-sounding tile be injected?

Indkøbskurv

Populære søgninger

Populære produkter

If your grout is cracking, you probably do not have a grout problem. You have a tile problem.

What to check before removing grout

Why grout alone does not fix a loose tile

Repair a suitable loose tile, then the grout

Step 1: Diagnose the movement

Step 2: Prepare the access point

Step 3: Apply the adhesive

Step 4: Weight and cure

Step 5: Restore the grout line

Choose the products for the job

Common questions

Does cracked grout always mean loose tiles?

Can I finish the whole repair in 30 minutes?

Must every hollow-sounding tile be injected?