6 x Plank Grabber™ Suction Pads

Genuine replacement pads for Plank Grabber

The Nano Suction pad is the part of Plank Grabber that does the gripping, and it is the part that wears. This pack gives you six genuine replacement pads, enough to keep a Plank Grabber floor gap fixer in daily trade use running for a long time, or a DIY tool running for life.

How the grip works

Each pad carries millions of tiny suckers that create a vacuum on the plank. On smooth laminate it seals completely. On textured laminate, LVT and click vinyl, a large share of the suckers still hold, which is why Plank Grabber grips where an ordinary suction cup slips. The pads peel off cleanly with no sticky residue on the floor.

When to change a pad

Grit and dust are what reduce the grip. Washing the pad in warm water and letting it dry brings the suction back many times over, so try that first. Fit a fresh pad when the old one is torn, worn flat, or will not hold on textured boards after a clean. One pad lasts dozens of repairs.

How to fit a new pad

1. Warm the old pad with a hairdryer, or stand the tool in hot water for two to three minutes.
2. Peel the old pad away. A fuzzy layer stays behind on the tool. Leave it there, as it is the base for the new pad.
3. Press the new pad firmly on top, flat and square. It is ready to use straight away, with no glue and no tools.

Will it fit my tool?

Yes, if you have a Plank Grabber made since 2021, whichever pack it came in. These are genuine Floor-Fix Pro spares.

In the pack

6 x Nano Suction pads. If your rubber end caps are worn too, the Plank Grabber Service Kit has 2 pads and 2 end caps. The billet aluminium end caps are sold separately.

Designed in England by Floor-Fix Pro, makers of the Plank Grabber, Gold Winner at the 2025 Flooring Innovation Awards.