Twist & Grout Repair Kit is a tile grout repair kit for refreshing tired grout lines and tackling grout touch-ups. Each tube comes with a spatula to help you apply and smooth the product for a neat finish.
Grout repair and restoration for tiled areas
Refresh the appearance of grout around kitchen and bathroom tiles. Whether you are planning a floor grout repair or tidying grout lines on a tiled wall, check the condition of the tiles and follow the product instructions before starting.
Check for loose tiles first
If grout is cracked, check whether the surrounding tiles are loose or moving before repairing it. Address loose tiles before restoring the grout. Grout repair is not a substitute for rebonding a loose tile. Explore Injectafix for loose tile repair and check its suitability for your floor.
What is included?
- One tube of Twist & Grout in your selected colour.
- A spatula for application and smoothing.
Choose your grout colour
The colour options listed above are White, Light Grey, Dark Grey, Anthracite, Cream, Beige and Grey. Check the selected option and availability before adding to your basket. For a grey grout repair, compare the named grey options carefully rather than assuming they are the same shade.
How to repair tile grout with Twist & Grout
-
Check the tiles first. Press on the tiles around the cracked grout. If any move or sound hollow, fix them first with Injectafix, or the new grout will crack again.
-
Rake out the old grout. Remove the damaged, loose or stained grout from the joint and brush out the dust. Twist & Grout needs a clean joint to bond to.
-
Fill and smooth. Twist the grout into the joint, then press it in and smooth it with the spatula. Wipe excess off the tile face.
-
Let it dry. It's touch dry in about 6–8 hours and fully cured in 24 hours. Leave it to cure fully before showering or mopping.
For the full walkthrough, including showers and removing old grout without chipping tiles, see our guide: how to regrout tiles and showers.
Frequently asked questions
Can you put new grout over old grout?
No. Rake out the old grout first. New grout spread over the top of old grout won't bond properly and will flake away.
Can you spot-fill or touch up grout?
Yes. You only need to rake out and refill the damaged section, not the whole floor or wall.
Can I use it in a shower or bathroom?
Yes, Twist & Grout is suitable for wet areas, including showers. Let it cure fully for 24 hours before the area gets wet.
How wide a grout line can it fill?
Joints up to 10mm. Wider joints take longer to dry.
Why does my grout keep cracking?
Grout that cracks again and again usually means a loose or hollow tile underneath. Fix the tile first, then regrout. Read more about cracked grout and loose tiles.
Before you start
Follow the preparation, application and drying instructions supplied with your kit. Unsure whether you need grout restoration or loose tile repair? Ask Floor-Fix Pro for advice before choosing a product.
