Why Injectafix Leads Loose Tile Repair
Injectafix is Floor-Fix Pro's adhesive line for suitable loose tiles and accessible voids beneath floors. Its purpose is to help restore the bond while keeping an intact surface in place. The key decision is whether the floor is suitable for injection repair.
What Injectafix does
The flexible, self-levelling co-polymer adhesive flows into an accessible void beneath a compatible floor surface. For tile repair, the tile should be intact and the substrate sound. It is not a substitute for repairing rot, structural movement, active water ingress or cracked-through tiles.
A hollow or drummy sound can indicate a void, but does not establish why it is there or whether repair is necessary. Check for movement, damage and the extent of the problem before choosing an adhesive.
Precision cartridge or Easy Squeeze?
| Format | Application | Contents |
|---|---|---|
| Injectafix Pro / Precision | Cartridge used with a caulking gun and precision injection tip | 300ml per cartridge |
| Injectafix Easy Squeeze | Squeezable tube; no caulking gun needed | 300ml per tube |
Both contain the same adhesive formula. Choose the applicator format you prefer, then follow its supplied instructions for preparing the access point and tip. The format choice does not change whether the floor is suitable for repair.
The repair sequence
- Assess the tile, substrate and cause of movement.
- Prepare and clean the access point as directed for your format.
- Apply adhesive into the accessible void without forcing or lifting the tile.
- Clean excess immediately and weight the tile as instructed.
- Keep traffic off and leave undisturbed for at least 24 hours as directed.
- Confirm the bond has cured and the tile is stable, then restore the grout.
Follow the full loose-tile repair guide. Grout restoration follows a successful tile repair; it does not replace it.
Choose by floor problem
- Suitable intact loose tile: assess for Injectafix injection repair.
- Friction in a grooved click joint: start with the Squeaky Floor Test Kit.
- Gap between movable planks: consider Plank Grabber. Use joint adhesive only where permitted by the flooring manufacturer.
- Rot, structural failure or ongoing moisture: investigate and repair the cause before choosing a surface treatment.
Questions before you buy
How much adhesive will I need?
That depends on the size and depth of the accessible void. A tile's visible area alone is not enough to calculate coverage. Check the current product page for unit size, pack options and prices.
Can I use ordinary glue instead?
Choose an adhesive whose instructions support the intended floor repair and substrate. Appearance or colour alone does not establish compatibility, flow or performance.
How soon can the floor be used?
Follow the pack's curing instructions. Keep the repair undisturbed for at least 24 hours as directed and check the tile is secure. A quick application is not an immediate return-to-use time.
What if the tile still moves?
Reassess access, substrate condition and the cause of movement. More adhesive is not automatically the answer; an unsuitable or widespread failure can require another repair method.
View the Precision cartridge or the Easy Squeeze tube. For other symptoms, use the Floor-Fix Pro repair guide.